Polymer-based coating ultrasonic thickness gauge POSITECTOR 200 made by DEFELSKO company in America
Using the ultrasonic method, measuring the thickness of single and three layers on non-metallic and polymeric bases (rubber, plastic, concrete, wood, asphalt, composite materials, etc.),…
Device Name: Pull-off Adhesion Tester Application: to measure the adhesion of paint and coating Manufacturer: Defelsko USA Model: Posi test ATA automatic digital and manual digital models Posi test ATM
Name of the device: SALT SPRAY
Manufacturer: GOTECH, Taiwan
Application: Creating conditions of salt fog to observe the degree of product degradation
Model: 108 liter, 270 liter and 400 liter
Surface roughness meter or roughness test
Application: To determine the texture of the surface roughness, by determining the amount of vertical changes on the surface compared to the real smooth surface
Manufacturing company: Mitutoyo of Japan and NEURTEK of Spain and AMITTARI of Hong Kong
Model :
1-Sandblast roughness meter
2-Surface roughness gauge (Ra, Ry, Rz)
Roughness is a measure to determine the texture of the surface and it is determined by determining the amount of vertical changes on the surface compared to the actual smooth surface. If these changes are large, it has a rough surface, and if it is small, it is soft. Roughness plays an important role in determining the mutual effect of surfaces and by knowing it, many behaviors of mechanical components can be predicted. In the usual equipment for roughness measurement, which is known as roughness tester or roughness tester, contact method is used and a needle-like head moved on the surface according to the number of oscillations and maximum displacement can determine the surface roughness.
Device name: Taber wear device
Application: To determine the wear resistance of all kinds of products, including paint, leather, plastic, etc.
Manufacturing company: Made by Taiwan’s Gotech company with American Tabera brands
Model: GT-7012-T
Standards: ISIRI 11159, ISO 17076 ، ISIRI 7621, ISO 5470 ، ISIRI 8332, ASTM D 3884
Name of the device: Thermograph (temperature data logger)
Application: recording the temperature data of paint baking ovens
Manufacturing company: TQC Netherlands
Model: CURVE-X3
CURVE-X3 is recommended for paint curing ovens due to its easy use and high quality of temperature data recording. TQC IDEAL FINISH software analyzes the recorded data. Three simple steps of operation:
⦁ Connecting the probes to the device and turning on the device key ⦁ placing the device in the box and sending it into the furnace ⦁ Reading the results from the screen or sending them to the printer
Thickness gauge
The thickness gauge is one of the most essential and basic equipments of paint and resin and industrial coating laboratories. The thickness gauge is used to inspect and measure the thickness of paint and coating, the thickness of plating and the thickness of galvanized, the thickness of anodizing and the thickness of coating on wood, asphalt and concrete. And … is used. Coating thickness measurement is very important in QC discussion in product quality control, process control and cost control of consumables. Among the important industries where the thickness gauge device is used are paint and resin industries, powder paints, traffic paints, construction paints, industry electroplating, aluminum anodizing industry, automobile industry, pipe coating industry, home appliance industry, etc.
This device is available in self-probe and separate probe models.
Ferrous (F) series devices for measuring the thickness of paint, glaze, epoxy, phosphate, hot galvanized, hard, etc. are based on ferrous metals.
Non Ferrous (N) series devices for measuring the thickness of paint, glaze, epoxy, Teflon, anodizing, aluminum, etc. are based on non-ferrous metals.
(FNF) series devices for measuring coating thickness are based on ferrous and non-ferrous metals and have both high capabilities.
The thickness of the non-metal base:
Wood thickness gauge This device is used to measure the thickness of non-metallic and polymer-based coatings such as (rubber, plastic, concrete, wood, asphalt, composite materials, etc.). A thickness gauge is used.
Ultrasonic thickness gauge
The application of this device is to measure the wall thickness of metal, steel, plastic pipes, etc.
After some time, material transfer pipes get corroded and the thickness of the pipe wall decreases. The thickness of ultrasonic gauges by sending ultrasonic waves and its reflection is able to measure the wall thickness of metal and plastic pipes, etc.
Thickness gauges
Paint thickness gauges are used in different fields to measure the thickness of polymer surfaces, concrete, wood, walls, steel and plastic pipes, etc.
Various types of thickness gauges are used to measure paint, glaze, epoxy, and galvanized coatings. Iron base as well as anodizing and Teflon are non-ferrous based. Also, ultrasonic thickness gauges are used to measure the coating on polymer surfaces and to measure the wall thickness of steel and plastic
The types of paint thickness gauges:
1- Thickness gauge of paint and coating and plating
POSITECTOR6000 model (separate and independent probe) made by DEFELSKO company in America
2- Digital thickness gauge of paint, coating and plating
Head probe based on Fe/NFe (ferrous and non-ferrous metals) Made in China, model LD0800
3-Digital thickness gauge of paint, coating and plating
Separate probe based on Fe/NFe made in China
4- Digital coating thickness gauge POSITECTOR 200 model made by DEFELSKO company in America
by ultrasonic method, measuring the thickness of single and three layers on polymer surfaces, concrete, wood, etc.
5- UTG (Ultrasonic Wall Thickness) ultrasonic thickness gauge made by Deflesko company in America
By ultrasonic method, to measure the wall thickness of steel, plastic, etc
Thickness gauge of paint and coating, electroplating, galvanization, and electroplating based on metals
1- POSITECTOR 6000 model made by DEFELSKO company in America in head probe and separate probe models
Ferrous (F) series devices for measuring the thickness of paint, glaze, epoxy, phosphate, hot galvanized, hard, etc. are based on iron.
Non Ferrous (N) series devices for measuring the thickness of paint, glaze, epoxy, Teflon, anodizing, aluminum, etc. are non-ferrous based.
(FNF) series devices are thickness gauges for coating on ferrous and non-ferrous metals and have both high capabilities.
2- Thickness gauge of paint and coating and plating
Dual-purpose based on ferrous metals and non-ferrous metals (Fe/NFe)
Self-contained probe and separate probe made in China
Ultrasonic thickness gauge
1- UTG (ULTRASONIC THICKNESS GAUGE) model made by DEFELSKO company in America
by ultrasonic method, in order to measure the thickness of metal, steel, plastic, etc. wall and pipe.
2- FC-100 ultrasonic thickness gauge made in China
By ultrasonic method, to measure the thickness of metal, steel, plastic wall and pipe
Name of the device: types of Krebs and rotary viscometers in different viscosity ranges
Application: To measure the viscosity of paint and resin and industrial adhesives and liquids
Manufacturer: MYR Spain
Viscosity cups
Application: The flow process (flow) inside an orifice is used to measure viscosity to determine the uniformity of paints, varnishes and other similar products. Viscosity cups are available in two fixed and variable nozzle models.
1- Fixed nozzle
2- Interchangeble nozzle
Density cup (pycnometer:
Application: The pycnometer is used to measure the specific gravity of each unit volume of coatings, adhesives or similar liquids at a temperature
Krebs viscometer:
Application: to measure the viscosity of paint and resin
Manufacturer: TQC Netherlands
Device specifications: Measurability: Ku, CP, g
Range: 40.2 – 141 KU (resolution 0.1 KU), 27 – 5274 cP (resolution 5 Cp)
Standard: ASTM D562-01, ASTM D856, ASTM D1131
Device name: Viscosity cups
Application: The flow process (flow) inside an orifice to measure viscosity to determine the uniformity of paints, varnishes and other similar products. Model: Viscosity cups with fixed or variable nozzle Made by: TQC Netherlands and NEURTEK Spain 1-Fixed nozzle 2-Variable nozzle: with 1, 2, 3, 4, 5, 6, 7, and 8 mm nozzles
Farvardin Kala Peyman
Company
Products
Contact us
All Rights Reserved by farvardin kala Designed by Navak
