Viscosity cups
Application: The flow process (flow) inside an orifice is used to measure viscosity to determine the uniformity of paints, varnishes and other similar products. Viscosity cups are available in two fixed and variable nozzle models.
1- Fixed nozzle
2- Interchangeble nozzle
Density cup (pycnometer:
Application: The pycnometer is used to measure the specific gravity of each unit volume of coatings, adhesives or similar liquids at a temperature
Krebs viscometer:
Application: to measure the viscosity of paint and resin
Manufacturer: TQC Netherlands
Device specifications: Measurability: Ku, CP, g
Range: 40.2 – 141 KU (resolution 0.1 KU), 27 – 5274 cP (resolution 5 Cp)
Standard: ASTM D562-01, ASTM D856, ASTM D1131
Name of the device: SALT SPRAY
Manufacturer: GOTECH, Taiwan
Application: Creating conditions of salt fog to observe the degree of product degradation
Model: 108 liter, 270 liter and 400 liter
Name of the device: density cups and pycnometers
Application: To measure the specific gravity weight (density) of each unit volume of coatings, adhesives or similar liquids at a temperature.
Model: in volumes of 50 and 100 ml, aluminum and steel
Manufacturer: TQC Netherlands and NEURTEK Spain
Name of the device: paint and coating hardness tester (paint and surface coating scratch test)
Application: It is a tool for testing the hardness and scratch resistance of coating materials such as coatings, lacquers, plastics, etc
Manufacturing company: TQC Netherlands and NEURTEK Spain and AMITTARI Hong Kong
Pen hardness tester: This tool is used with three types of springs
Name of the device: Paint and Resin Applicator
Application: applying a coating with a certain thickness on the surface Image Manufacturing company: TQC Netherlands and NEURTEK Spain
1-BAKER FILM APPLICATORS
2–BIRD-TYPE FILM APPLICATORS
3- Sided FILM APPLICATOR
4-TRIPLE RESERVOIR FILM APPLICATOR 90|150 MICRONS
5-MICROMETER FILM APPLICATORS
6-FILMAPPLICATOR FOR SAG AND LEVELLING
7-WIRE BAR COATER
8-SIDED FILM APPLICATOR
9-AUTOMATIC FILM APPLICATORS
Name of the device: Grindometer
Application: To determine the size of particles and fine grains of most materials such as paints, varnishes, colored materials, fillers, etc.
Model: two grooves with graded slopes in 3 scales µm (micron), PCU (North), NS (Hegman)
manufacturing company: TQC Netherlands and NEURTEK Spain
Polymer-based coating ultrasonic thickness gauge POSITECTOR 200 made by DEFELSKO company in America
Using the ultrasonic method, measuring the thickness of single and three layers on non-metallic and polymeric bases (rubber, plastic, concrete, wood, asphalt, composite materials, etc.),…
Farvardin Kala Peyman
Company
Products
Contact us
All Rights Reserved by farvardin kala Designed by Navak
