Viscosity cups
Application: The flow process (flow) inside an orifice is used to measure viscosity to determine the uniformity of paints, varnishes and other similar products. Viscosity cups are available in two fixed and variable nozzle models.
1- Fixed nozzle
2- Interchangeble nozzle
Density cup (pycnometer:
Application: The pycnometer is used to measure the specific gravity of each unit volume of coatings, adhesives or similar liquids at a temperature
Krebs viscometer:
Application: to measure the viscosity of paint and resin
Manufacturer: TQC Netherlands
Device specifications: Measurability: Ku, CP, g
Range: 40.2 – 141 KU (resolution 0.1 KU), 27 – 5274 cP (resolution 5 Cp)
Standard: ASTM D562-01, ASTM D856, ASTM D1131
Device name: Viscosity cups
Application: The flow process (flow) inside an orifice to measure viscosity to determine the uniformity of paints, varnishes and other similar products. Model: Viscosity cups with fixed or variable nozzle Made by: TQC Netherlands and NEURTEK Spain 1-Fixed nozzle 2-Variable nozzle: with 1, 2, 3, 4, 5, 6, 7, and 8 mm nozzles
Device Name: Pull-off Adhesion Tester Application: to measure the adhesion of paint and coating Manufacturer: Defelsko USA Model: Posi test ATA automatic digital and manual digital models Posi test ATM
Device Name: Cupping Test
Application: To determine the tensile strength of protective coatings such as paints and resins against volume change, cupping, and sagging
Manufacturer: TQC Netherlands and NEURTEK Spain
Model: manual and automatic
Name of the device: Paint and Resin Applicator
Application: applying a coating with a certain thickness on the surface Image Manufacturing company: TQC Netherlands and NEURTEK Spain
1-BAKER FILM APPLICATORS
2–BIRD-TYPE FILM APPLICATORS
3- Sided FILM APPLICATOR
4-TRIPLE RESERVOIR FILM APPLICATOR 90|150 MICRONS
5-MICROMETER FILM APPLICATORS
6-FILMAPPLICATOR FOR SAG AND LEVELLING
7-WIRE BAR COATER
8-SIDED FILM APPLICATOR
9-AUTOMATIC FILM APPLICATORS
Name of the device: Grindometer
Application: To determine the size of particles and fine grains of most materials such as paints, varnishes, colored materials, fillers, etc.
Model: two grooves with graded slopes in 3 scales µm (micron), PCU (North), NS (Hegman)
manufacturing company: TQC Netherlands and NEURTEK Spain
Ultrasonic thickness gauge
1- UTG (ULTRASONIC THICKNESS GAUGE) model made by DEFELSKO company in America
by ultrasonic method, in order to measure the thickness of metal, steel, plastic, etc. wall and pipe.
2- FC-100 ultrasonic thickness gauge made in China
By ultrasonic method, to measure the thickness of metal, steel, plastic wall and pipe
Farvardin Kala Peyman
Company
Products
Contact us
All Rights Reserved by farvardin kala Designed by Navak
