Device name: Viscosity cups
Application: The flow process (flow) inside an orifice to measure viscosity to determine the uniformity of paints, varnishes and other similar products.
Model: Viscosity cups with fixed or variable nozzle
Made by: TQC Netherlands and NEURTEK Spain
1-Fixed nozzle
2-Variable nozzle: with 1, 2, 3, 4, 5, 6, 7, and 8 mm nozzles
Name of the device: SALT SPRAY
Manufacturer: GOTECH, Taiwan
Application: Creating conditions of salt fog to observe the degree of product degradation
Model: 108 liter, 270 liter and 400 liter
BENDING TEST Application: Determination of coating resistance in terms of flexibility or cracking getting layered Manufacturer: TQC Netherlands and NEURTEK Spain Model: conical and cylindrical
Name of the device: paint and coating hardness tester (paint and surface coating scratch test)
Application: It is a tool for testing the hardness and scratch resistance of coating materials such as coatings, lacquers, plastics, etc
Manufacturing company: TQC Netherlands and NEURTEK Spain and AMITTARI Hong Kong
Name of the device: GLOSSMETER Application: To measure the surface gloss by measuring the amount of light absorption Manufacturing company: TQC Netherlands, NEURTEK Spain and AMITTARI Hong Kong Model: single angle (60°), two angles (20° / 60°) and three angles (20° / 60° / 85°)
Name of the device: Paint and Resin Applicator
Application: applying a coating with a certain thickness on the surface Image Manufacturing company: TQC Netherlands and NEURTEK Spain
1-BAKER FILM APPLICATORS
2–BIRD-TYPE FILM APPLICATORS
3- Sided FILM APPLICATOR
4-TRIPLE RESERVOIR FILM APPLICATOR 90|150 MICRONS
5-MICROMETER FILM APPLICATORS
6-FILMAPPLICATOR FOR SAG AND LEVELLING
7-WIRE BAR COATER
8-SIDED FILM APPLICATOR
9-AUTOMATIC FILM APPLICATORS
Thickness gauge
The thickness gauge is one of the most essential and basic equipments of paint and resin and industrial coating laboratories. The thickness gauge is used to inspect and measure the thickness of paint and coating, the thickness of plating and the thickness of galvanized, the thickness of anodizing and the thickness of coating on wood, asphalt and concrete. And … is used. Coating thickness measurement is very important in QC discussion in product quality control, process control and cost control of consumables. Among the important industries where the thickness gauge device is used are paint and resin industries, powder paints, traffic paints, construction paints, industry electroplating, aluminum anodizing industry, automobile industry, pipe coating industry, home appliance industry, etc.
This device is available in self-probe and separate probe models.
Ferrous (F) series devices for measuring the thickness of paint, glaze, epoxy, phosphate, hot galvanized, hard, etc. are based on ferrous metals.
Non Ferrous (N) series devices for measuring the thickness of paint, glaze, epoxy, Teflon, anodizing, aluminum, etc. are based on non-ferrous metals.
(FNF) series devices for measuring coating thickness are based on ferrous and non-ferrous metals and have both high capabilities.
The thickness of the non-metal base:
Wood thickness gauge This device is used to measure the thickness of non-metallic and polymer-based coatings such as (rubber, plastic, concrete, wood, asphalt, composite materials, etc.). A thickness gauge is used.
Ultrasonic thickness gauge
The application of this device is to measure the wall thickness of metal, steel, plastic pipes, etc.
After some time, material transfer pipes get corroded and the thickness of the pipe wall decreases. The thickness of ultrasonic gauges by sending ultrasonic waves and its reflection is able to measure the wall thickness of metal and plastic pipes, etc.
Thickness gauges
Paint thickness gauges are used in different fields to measure the thickness of polymer surfaces, concrete, wood, walls, steel and plastic pipes, etc.
Various types of thickness gauges are used to measure paint, glaze, epoxy, and galvanized coatings. Iron base as well as anodizing and Teflon are non-ferrous based. Also, ultrasonic thickness gauges are used to measure the coating on polymer surfaces and to measure the wall thickness of steel and plastic
The types of paint thickness gauges:
1- Thickness gauge of paint and coating and plating
POSITECTOR6000 model (separate and independent probe) made by DEFELSKO company in America
2- Digital thickness gauge of paint, coating and plating
Head probe based on Fe/NFe (ferrous and non-ferrous metals) Made in China, model LD0800
3-Digital thickness gauge of paint, coating and plating
Separate probe based on Fe/NFe made in China
4- Digital coating thickness gauge POSITECTOR 200 model made by DEFELSKO company in America
by ultrasonic method, measuring the thickness of single and three layers on polymer surfaces, concrete, wood, etc.
5- UTG (Ultrasonic Wall Thickness) ultrasonic thickness gauge made by Deflesko company in America
By ultrasonic method, to measure the wall thickness of steel, plastic, etc
Farvardin Kala Peyman
Company
Products
Contact us
All Rights Reserved by farvardin kala Designed by Navak
