Polymer-based coating ultrasonic thickness gauge POSITECTOR 200 made by DEFELSKO company in America
Using the ultrasonic method, measuring the thickness of single and three layers on non-metallic and polymeric bases (rubber, plastic, concrete, wood, asphalt, composite materials, etc.),…
Name of the device: SALT SPRAY
Manufacturer: GOTECH, Taiwan
Application: Creating conditions of salt fog to observe the degree of product degradation
Model: 108 liter, 270 liter and 400 liter
Viscosity cups
Application: The flow process (flow) inside an orifice is used to measure viscosity to determine the uniformity of paints, varnishes and other similar products. Viscosity cups are available in two fixed and variable nozzle models.
1- Fixed nozzle
2- Interchangeble nozzle
Density cup (pycnometer:
Application: The pycnometer is used to measure the specific gravity of each unit volume of coatings, adhesives or similar liquids at a temperature
Krebs viscometer:
Application: to measure the viscosity of paint and resin
Manufacturer: TQC Netherlands
Device specifications: Measurability: Ku, CP, g
Range: 40.2 – 141 KU (resolution 0.1 KU), 27 – 5274 cP (resolution 5 Cp)
Standard: ASTM D562-01, ASTM D856, ASTM D1131
Name of the device: paint and coating hardness tester (paint and surface coating scratch test)
Application: It is a tool for testing the hardness and scratch resistance of coating materials such as coatings, lacquers, plastics, etc
Manufacturer: NEURTEK Spain and TQC Netherlands Pendulum hardness tester: determination of hardness with KONIG and PERSOZ methods. In both methods, the number of oscillations of the pendulum on the surface of the sample shows the hardness of the sample.
Device name: Taber wear device
Application: To determine the wear resistance of all kinds of products, including paint, leather, plastic, etc.
Manufacturing company: Made by Taiwan’s Gotech company with American Tabera brands
Model: GT-7012-T
Standards: ISIRI 11159, ISO 17076 ، ISIRI 7621, ISO 5470 ، ISIRI 8332, ASTM D 3884
Name of the device: GLOSSMETER Application: To measure the surface gloss by measuring the amount of light absorption Manufacturing company: TQC Netherlands, NEURTEK Spain and AMITTARI Hong Kong Model: single angle (60°), two angles (20° / 60°) and three angles (20° / 60° / 85°)
Device Name: Adhesion Test (Cross Cut)
Application: to measure the adhesion of paint and resin coatings
Model: one-sided or 4-sided blade with 1, 2 or 3 mm blade intervals
Made by: TQC Netherlands and NEURTEK Spain
Farvardin Kala Peyman
Company
Products
Contact us
All Rights Reserved by farvardin kala Designed by Navak
