Name of the device: SALT SPRAY
Manufacturer: GOTECH, Taiwan
Application: Creating conditions of salt fog to observe the degree of product degradation
Model: 108 liter, 270 liter and 400 liter
Viscosity cups
Application: The flow process (flow) inside an orifice is used to measure viscosity to determine the uniformity of paints, varnishes and other similar products. Viscosity cups are available in two fixed and variable nozzle models.
1- Fixed nozzle
2- Interchangeble nozzle
Density cup (pycnometer:
Application: The pycnometer is used to measure the specific gravity of each unit volume of coatings, adhesives or similar liquids at a temperature
Krebs viscometer:
Application: to measure the viscosity of paint and resin
Manufacturer: TQC Netherlands
Device specifications: Measurability: Ku, CP, g
Range: 40.2 – 141 KU (resolution 0.1 KU), 27 – 5274 cP (resolution 5 Cp)
Standard: ASTM D562-01, ASTM D856, ASTM D1131
Name of the device: density cups and pycnometers
Application: To measure the specific gravity weight (density) of each unit volume of coatings, adhesives or similar liquids at a temperature.
Model: in volumes of 50 and 100 ml, aluminum and steel
Manufacturer: TQC Netherlands and NEURTEK Spain
Name of the device: Thermograph (temperature data logger)
Application: recording the temperature data of paint baking ovens
Manufacturing company: TQC Netherlands
Model: CURVE-X3
CURVE-X3 is recommended for paint curing ovens due to its easy use and high quality of temperature data recording. TQC IDEAL FINISH software analyzes the recorded data. Three simple steps of operation:
⦁ Connecting the probes to the device and turning on the device key ⦁ placing the device in the box and sending it into the furnace ⦁ Reading the results from the screen or sending them to the printer
Color and coating hardness tester
Application: It is a tool for testing the hardness and scratch resistance of coating materials such as coatings, lacquers, plastics, etc
Model:
1-Pencil hardness tester
2- Pen hardness tester: This tool is used with three types of springs
3-Pandoli hardness tester:
determination of hardness with KONIG and PERSOZ methods.
In both methods, according to the ISO15220 standard, the number of oscillations of the pendulum on the surface of the sample shows the hardness of the sample
Name of the device: GLOSSMETER Application: To measure the surface gloss by measuring the amount of light absorption Manufacturing company: TQC Netherlands, NEURTEK Spain and AMITTARI Hong Kong Model: single angle (60°), two angles (20° / 60°) and three angles (20° / 60° / 85°)
Polymer-based coating ultrasonic thickness gauge POSITECTOR 200 made by DEFELSKO company in America
Using the ultrasonic method, measuring the thickness of single and three layers on non-metallic and polymeric bases (rubber, plastic, concrete, wood, asphalt, composite materials, etc.),…
Farvardin Kala Peyman
Company
Products
Contact us
All Rights Reserved by farvardin kala Designed by Navak
