Cross Cut

Device Name: Adhesion Test (Cross Cut)

Application: to measure the adhesion of paint and resin coatings

Model: one-sided or 4-sided blade with 1, 2 or 3 mm blade intervals

Made by: TQC Netherlands and NEURTEK Spain

Viscosity

Viscosity cups

Application: The flow process (flow) inside an orifice is used to measure viscosity to determine the uniformity of paints, varnishes and other similar products. Viscosity cups are available in two fixed and variable nozzle models.

1- Fixed nozzle

2- Interchangeble nozzle

Density cup (pycnometer:

Application: The pycnometer is used to measure the specific gravity of each unit volume of coatings, adhesives or similar liquids at a temperature

Krebs viscometer:

Application: to measure the viscosity of paint and resin

Manufacturer: TQC Netherlands

Device specifications: Measurability: Ku, CP, g

Range: 40.2 – 141 KU (resolution 0.1 KU), 27 – 5274 cP (resolution 5 Cp)

Standard: ASTM D562-01, ASTM D856, ASTM D1131

viscometers

Name of the device: types of Krebs and rotary viscometers in different viscosity ranges

Application: To measure the viscosity of paint and resin and industrial adhesives and liquids

Manufacturer: MYR Spain

THERMOGRAPH

Name of the device: Thermograph (temperature data logger)

Application: recording the temperature data of paint baking ovens

Manufacturing company: TQC Netherlands

Model: CURVE-X3

CURVE-X3 is recommended for paint curing ovens due to its easy use and high quality of temperature data recording. TQC IDEAL FINISH software analyzes the recorded data. Three simple steps of operation:

⦁ Connecting the probes to the device and turning on the device key ⦁ placing the device in the box and sending it into the furnace ⦁ Reading the results from the screen or sending them to the printer